Skip to content
Experiencing a breach? Get help now
Cyberphore

Government and defence suppliersAnalysis

CPCSC for Defence Suppliers: Levels, Timeline, Preparation

The Canadian Program for Cyber Security Certification (CPCSC) sets cyber security requirements for suppliers handling specified information on Canadian defence contracts. Level 1, an annual self-assessment of 13 controls from ITSP.10.171, has been available since April 1, 2026 and appears in select contracts. Levels 2 and 3 are still under development, with phased introduction signalled from spring 2027.

Published
Last reviewed
Reading time
8 min
A padlock over a stylized maple leaf circuit board, representing cyber security certification for Canadian defence suppliers.
On this page (9 sections, 8 min read)

The Canadian Program for Cyber Security Certification (CPCSC) is how the federal government verifies that defence suppliers protect sensitive unclassified contract information. As of November 14, 2026, Level 1, an annual self-assessment of 13 controls, is live and appears in select defence contracts, while Levels 2 and 3 are still being built, with phased introduction signalled from spring 2027 but no firm date. If you handle defence drawings, specifications or similar information, the practical move is to complete Level 1 now and start Level 2 groundwork, because scoping and remediation take months.

This article is general information. Requirements are set contract by contract, so always confirm against the solicitation. For a short definition, see What is CPCSC?.

What the CPCSC Is and Who Runs It

The CPCSC is a certification program for defence suppliers under the responsibility of Public Services and Procurement Canada (PSPC) and National Defence (BDC, 2026). The Standards Council of Canada, the Canadian Centre for Cyber Security and Treasury Board Secretariat also support the program (SAV Associates, 2026).

The technical standard behind it is ITSP.10.171, published by the Cyber Centre. It is a Canadian version of NIST SP 800-171 with "no substantial technical changes"; the differences reflect Canadian laws and policies (Canadian Centre for Cyber Security, 2025). Its requirements are organized into 17 families, from access control and incident response to supply chain risk management. The standard took effect on April 2, 2025, and its second release is dated October 28, 2025 (Canadian Centre for Cyber Security, 2025).

What Information It Protects

The program protects "specified information", which ITSP.10.171 defines as information, other than classified, that a Government of Canada authority identifies and qualifies in a contract as requiring safeguarding (Canadian Centre for Cyber Security, 2025). That can include non-public engineering drawings and test results, information on controlled goods, and Protected A, B or C information tied to the contract (BDC, 2026). The contract decides what counts. If it is unclear, ask the contracting authority rather than guess.

The Three CPCSC Levels

Level How it is verified Scope of controls Status as of November 14, 2026
Level 1 Annual self-assessment and attestation 13 core controls Available since April 1, 2026, and required in some defence contracts
Level 2 External assessment by a certification body accredited by the Standards Council of Canada, plus annual confirmation 98 controls, per PSPC figures reported by BDC Under development
Level 3 Assessment by National Defence, plus annual confirmation Reserved for high-risk work such as weapon systems and information shared with Five Eyes partners Under development

Source: BDC, 2026. BDC notes that the Level 2 and 3 figures may change. Reported control counts for Level 3 already differ: BDC gives about 200, while an independent tracker reports that PSPC restated it as more than 130 in a September 29, 2026 revision (Hans Study, 2026). Treat Level 3 details as unsettled.

The required level is named in the solicitation and contract, and BDC notes that subcontractors that handle the information must also hold the appropriate certification (BDC, 2026).

Level 1: The 13 Controls

Level 1 is a self-assessment, not an audit. The supplier declares compliance on a federal government site, must be able to show proof that each control is in place, and records the result and expiry date in its CanadaBuys supplier profile. Where a contract requires Level 1, the self-assessment is needed at contract award, not during tendering (BDC, 2026).

The 13 controls, with their ITSP.10.171 identifiers (Pilotcore, 2026; identifiers confirmed against ITSP.10.171):

ITSP.10.171 ID Control What it means in a small supplier
03.01.01 Account management Every account is approved, named, reviewed and removed when people leave
03.01.02 Access enforcement People only reach the files and systems their role needs (least privilege)
03.01.20 Use of external systems Rules for personal devices, home computers and outside cloud services
03.01.22 Publicly accessible content Nothing sensitive goes on the website or public file shares
03.05.01 User identification and authentication Unique logins, no shared accounts
03.05.02 Device identification and authentication Only known, managed devices connect
03.05.03 Multi-factor authentication MFA on accounts that reach in-scope systems
03.08.03 Media sanitization Drives and USB keys wiped or destroyed before disposal or reuse
03.10.01 Physical access authorizations A list of who may enter areas holding in-scope systems
03.10.07 Physical access control Locks, badges or sign-in for those areas
03.13.01 Boundary protection A managed firewall and monitored internet edge
03.14.01 Flaw remediation Patching on a defined schedule
03.14.02 Malicious code protection Endpoint protection on in-scope devices

Level 1 goes further than the U.S. baseline in one notable way: the 15 basic safeguarding requirements in U.S. federal acquisition clause FAR 52.204-21 do not include multi-factor authentication (Acquisition.gov, 2026), while CPCSC Level 1 does.

CPCSC Timeline as of November 14, 2026

Published timing has moved more than once, and we could not confirm the latest PSPC program pages directly while preparing this article. The table separates what is confirmed from what is reported.

Date Milestone Confidence
April 2, 2025 ITSP.10.171 takes effect (Canadian Centre for Cyber Security, 2025) Confirmed, primary source
April 1, 2026 Level 1 available to suppliers (BDC, 2026) Confirmed by multiple sources
April 14, 2026 Government formally introduces Level 1 (SAV Associates, 2026) Reported by secondary sources
Summer 2026 Level 1 becomes a condition of award in some defence contracts (BDC, 2026) Confirmed by multiple sources
September 29, 2026 PSPC program overview revised; Levels 2 and 3 described as under development with no date (Hans Study, 2026) Reported by an independent tracker; low confidence
Spring 2027 to spring 2028 Level 2 and Level 3 requirements gradually incorporated into select contracts (Pilotcore, 2026; Hans Study, 2026) Planning assumption, not a confirmed date

BDC's September 2026 summary still gives spring 2027 for Level 2 (BDC, 2026). Our view: plan for Level 2 clauses appearing in select contracts during 2027, and check the PSPC program overview and each CanadaBuys solicitation before committing budget to a specific date.

How CPCSC Relates to CMMC

The U.S. Cybersecurity Maturity Model Certification (CMMC) and CPCSC share a lineage, but they are separate programs.

  • Same roots, different revisionsITSP.10.171 is a Canadian version of NIST SP 800-171 (Canadian Centre for Cyber Security, 2025). Canada's standard is derived from Revision 3, published in May 2024, while CMMC remains based on Revision 2 (BDC, 2026; NIST, 2024). CMMC Level 2 requires all 110 Revision 2 controls (Latham & Watkins, 2026), compared with the 98 reported for CPCSC Level 2.
  • No automatic reciprocityA valid CMMC certification may be recognized by Canada case by case, after verifying scope and, if needed, specific controls (BDC, 2026).
  • CMMC is itself in fluxThe U.S. defence acquisition rule that put CMMC requirements into contracts took effect on November 10, 2025, starting with Phase 1 self-assessments (Federal Register, 2025). On July 13, 2026, the U.S. Department of War suspended Phase 2, the third-party assessment phase that was due on November 10, 2026, while Phase 1 self-assessments remain in place (WilmerHale, 2026). A review task force has suggested Phase 2 could restart with a narrower population, but as of November 14, 2026 we found no announced restart date (Federal News Network, 2026).

If you sell to both governments, build one control environment and map it to both standards, but keep separate scoping, attestations and evidence for each program.

How to Prepare: A Plan for Suppliers of 10 to 500 People

Step 1: Confirm Whether It Applies

Read the security requirements in the contracts and solicitations you pursue. Ask whether you receive or create specified information, directly or as a subcontractor. If a prime passes you drawings, specifications or schedules for a defence program, assume CPCSC will reach you.

Step 2: Scope Tightly

Scope is everything that stores, processes or transmits specified information: people, locations and technology. It can be company-wide or a restricted enclave, and BDC notes that good scoping can significantly reduce complexity and cost (BDC, 2026). For example, a supplier might keep defence files in a dedicated Microsoft 365 site, accessed only from managed laptops used by one project team. Remember that cloud services and IT providers with access to that data are part of the picture.

Step 3: Complete Level 1 Now

Walk the 13 controls against your scoped environment, record each as met, partial or missing, close the gaps and keep evidence: screenshots, configuration exports, access lists, patch reports and sign-in logs. Then complete the self-assessment and record the result in CanadaBuys before a contract requires it. Set a renewal reminder, since it is annual.

Step 4: Run a Level 2 Gap Assessment Against ITSP.10.171

Level 2 covers all 17 families, including audit logging, configuration management, incident response, security awareness training and supply chain risk. Assess against the full standard, then rank gaps by effort and cost, and start with the ones that need new tooling or new processes, since those take longest. Ongoing vulnerability management supports several of these requirements at once.

Step 5: Document as You Go

Write a system security plan describing the scoped environment and how each requirement is met, and a plan of action for open gaps with owners and dates. Assessors test what is written against what is running, so documentation needs to match reality.

Step 6: Budget and Book Early

Level 2 costs have not been confirmed (BDC, 2026), and the pool of accredited certification bodies is still forming: PSPC has said the Standards Council of Canada will begin accepting certification body applications between April 2026 and March 2027, according to an independent tracker (Hans Study, 2026). Get indicative quotes once bodies are accredited, and plan remediation in the 2027 budget.

Step 7: Use What You Already Have

If you hold CyberSecure Canada certification or have implemented the Cyber Centre's baseline controls, you are likely to find much of Level 1 already covered. ISO 27001 and CMMC work also transfers, though the mapping needs checking control by control. Our guide on choosing a cyber security framework explains how these fit together.

What Remains Unconfirmed

As of November 14, 2026, we could not confirm a firm date for Level 2 or Level 3, the final Level 3 control count, or Level 2 assessment costs. We also could not read the PSPC program pages directly for this update and relied on the Business Development Bank of Canada and secondary trackers for the program's current wording. We will update this article when PSPC confirms dates.

How Cyberphore Can Help

Our compliance readiness team runs CPCSC scoping, Level 1 control reviews and ITSP.10.171 gap assessments, and helps assemble the evidence an assessor or contracting authority will ask for. Every team member holds industry certifications such as CISSP, CISM, OSCP or GIAC, and pricing is quoted in CAD after a free scoping call.

Share this article

Questions and Answers

What is CPCSC Level 1?

CPCSC Level 1 is an annual self-assessment in which a defence supplier confirms it has implemented 13 basic security controls from ITSP.10.171, such as access control, multi-factor authentication, boundary protection and malware protection. It has been available since April 1, 2026. Where a contract requires it, proof of the self-assessment and its expiry date goes into the supplier's CanadaBuys profile.

When will CPCSC Level 2 be required?

There is no confirmed date as of November 14, 2026. Earlier government timing pointed to Level 2 entering select contracts from spring 2027, with Levels 2 and 3 phased in through spring 2028. Secondary trackers report that the program overview now describes Levels 2 and 3 as under development. Check each solicitation and the PSPC program pages.

Does a CMMC certification count for CPCSC?

Not automatically. Both programs build on NIST SP 800-171, but they are separate, with no automatic reciprocity. Canada may recognize a valid CMMC certification case by case after verifying scope and, if needed, specific controls. Canada's standard follows NIST Revision 3, while CMMC still uses Revision 2, so control mappings are not one to one.

Do subcontractors need CPCSC certification?

Yes, if they handle the specified information named in the contract. Business Development Bank of Canada guidance notes that subcontractors that handle the information must hold the appropriate certification. A machine shop receiving drawings from a prime, or an IT provider with access to the systems holding them, should expect requirements to flow down.

Sources

Checked against these sources on . Primary and official sources are listed first.

  1. 1.Protecting specified information in non-Government of Canada systems and organizations (ITSP.10.171) (opens in a new tab)Canadian Centre for Cyber Security,
  2. 2.What is the Canadian Program for Cyber Security Certification (CPCSC)? (opens in a new tab)Business Development Bank of Canada (BDC),
  3. 3.SP 800-171 Rev. 3: Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations (opens in a new tab)National Institute of Standards and Technology,
  4. 4.Defense Federal Acquisition Regulation Supplement: Assessing Contractor Implementation of Cybersecurity Requirements (DFARS Case 2019-D041) (opens in a new tab)Federal Register (U.S. Department of Defense),
  5. 5.52.204-21 Basic Safeguarding of Covered Contractor Information Systems (opens in a new tab)Acquisition.gov (U.S. General Services Administration),
  6. 6.Pentagon Suspends CMMC Phase 2 Requirements and Launches Review of Cybersecurity Certification Program (opens in a new tab)WilmerHale,
  7. 7.What Defense Contractors Should Know About DOD's Suspension of CMMC Phase 2 (opens in a new tab)Latham & Watkins,
  8. 8.RFI offers path forward for DoD with CMMC (opens in a new tab)Federal News Network,
  9. 9.Canada Just Made CPCSC Mandatory. Your Next Defence Contract Depends On It (opens in a new tab)SAV Associates (via Legal 500),
  10. 10.Canadian Program for Cyber Security Certification (CPCSC): what is active (opens in a new tab)Pilotcore,
  11. 11.CPCSC explained: Canada's defence certification (opens in a new tab)Hans Study,

General information for Canadian organizations, not legal advice.

Written and reviewed by

Cyberphore Security Team

Certified security analysts and consultants

  • CISSP
  • CISM
  • OSCP
  • OSCE
  • GIAC GCIH
  • GIAC GCIA
  • GIAC GPEN
  • Microsoft SC-200

Articles are researched and written by Cyberphore's security team. Every team member, from analysts to leadership, holds industry certifications, and the team monitors and responds to threats for Canadian organizations 24/7/365. Every article is fact-checked against its sources and reviewed before publishing.

How we research, fact-check and update articles: editorial standards. Spotted an error? Email sales@cyberphore.com.

Keep reading

Continue Reading

Related services

Book free assessment