Skip to content
Experiencing a breach? Get help now
Cyberphore

Cybersecurity for manufacturing

Keep The Line Running.Keep Attackers Out.

OT-aware monitoring and segmentation that stops ransomware before it reaches the plant floor.

Analysts on watch
24/7
Critical alert response
15 min
Incident engagement
1 hour
CONSOLE00:00:00 ET3MT

OT / Kitchener plant

OT monitoring

Sample data

Certified partner of

Why this cannot wait

Average cost of an industrial sector data breach in Canada, 2026
CAD 8.89M
IBM, Cost of a Data Breach Report (Canada), 2026
Manufacturing ransomware attacks that encrypted data
40%
Sophos, The State of Ransomware in Manufacturing and Production, 2025
Manufacturers with encrypted data that paid the ransom
51%
Sophos, The State of Ransomware in Manufacturing and Production, 2025

What attackers want

Cybersecurity for Manufacturers Is Measured in Downtime

Attackers want control over your production schedule. Manufacturers pay attention to downtime in a way few other businesses do, and ransomware groups price their demands accordingly. When ransomware hits the ERP or spreads to the plant floor, lines stop, orders slip and penalties start.

They also want what you make and how you make it: designs, formulas, process parameters and customer drawings. And if you supply a larger company, you may be the easier path into their network.

Where an Attack Lands in a Plant, and What Stops

  1. OfficeOffice and enterprise systems
    • ERP
    • Email
    • File servers

    If it is hitNobody can see work orders, lot tracking or shipping schedules. Many manufacturers stop production because they cannot schedule, ship or invoice, even when plant systems are untouched.

  2. BoundaryBetween office IT and the plant
    • Firewall
    • Vendor remote access
    • Files copied to HMIs

    If it is hitThe ERP sends work orders to the floor, engineers copy files to HMIs and vendors connect remotely. If networks are flat, ransomware crosses here.

  3. PlantPlant floor
    • MES
    • HMIs
    • PLCs

    If it is hitLines stop directly. Controllers and HMIs running old operating systems cannot be patched easily and need compensating controls.

The goal: a bad email in the office does not become a production outage.

Risks and coverage

How Cyberphore Helps Manufacturers with Four Plant Risks

We start with the network, then add monitoring, patching priorities and help with your customers. Each risk below shows the service that leads and the ones that back it up.

Risk 1

Ransomware Causing Production Downtime

Attacks on ERP, MES or file servers stop scheduling and shipping. If IT and OT networks are flat, plant systems can be hit directly.

How we cover it: Separate plant and office systems so ransomware on the ERP side cannot reach the floor. Analysts investigate and contain threats on endpoints before they reach production.

Risk 2

Vendor and Integrator Remote Access

Machine builders and integrators often keep always-on remote access to PLCs and HMIs, sometimes with shared or default passwords.

How we cover it: Vendor remote access behind controls you can see and switch off: named accounts, MFA, approval and time limits, through a controlled gateway.

Risk 3

Legacy and Unpatchable OT Systems

Controllers and HMIs running old operating systems cannot be patched easily and need compensating controls.

How we cover it: A running, prioritized list of what needs patching and what needs a compensating control, such as segmentation, for systems you cannot patch.

Risk 4

Intellectual Property and Supply Chain Pressure

Designs, formulas and customer drawings are theft targets, and large customers now audit supplier security.

How we cover it: A vCISO answers customer questionnaires, plans improvements and reports to leadership. Monitoring helps catch intruders on the systems that hold designs and drawings.

Response commitment: AI-assisted monitoring with human analysts. Critical alerts are triaged and response begins within 15 minutes, 24/7/365.

Scenarios

Scenarios We See in Manufacturing

Illustrative scenarios based on common patterns, not specific clients. Two are attacks. The third is a customer audit, which can put a contract at risk without any breach.

ScenarioFood processor, Fraser Valley

The Monday Morning Stop

A food processor in the Fraser Valley finds its ERP and file servers encrypted. The plant floor systems are fine, but nobody can see work orders, lot tracking or shipping schedules, so production halts. Recovery takes days, and food safety records have to be rebuilt by hand.

Where it hit

Office IT: ERP and file servers
Encrypted
Plant floor systems
Untouched
Production
Halted

The plant floor was never hit, and the plant still stopped.

What would have changed the outcome

  • Backups of ERP, MES and recipes stored offline or immutably, with restores tested
  • A plan for running, shipping and tracking lots by hand if systems are down for a week
  • Monitoring of the office network, where most attacks start
Backup and ransomware recovery

Production stopped by an attack right now?Incident line, 24/7: +1 236 665 1165

IT and OT separation

Keep an Office Infection Away from the Plant Floor

Most plants are more connected than people think. A firewall between the office network and the plant, with only the traffic you need allowed through, limits how far an attack can spread.

CONSOLE00:00:00 ET3MT

Network / Segmentation

Office and plant separation

Sample data

Flat Network Versus a Segmented Plant

On a flat network, ransomware that starts on one office laptop can reach file servers and plant equipment alike. With the plant floor on its own segment behind firewall rules, the same infection stays in the office, where analysts can contain it.

For controllers and HMIs on old operating systems that cannot be patched easily, segmentation is one of the main compensating controls you have.

Network and firewall security

Who Looks After What at the Boundary

Cyberphore

The boundary between office IT and plant systems, where most manufacturing incidents start.

  • Segmentation and firewall rules between office and plant
  • Vendor remote access behind a controlled gateway
  • Monitoring of endpoints and the IT/OT boundary, 24/7/365

Your equipment vendors

Anything inside the OT network. We work alongside them rather than around them.

  • PLC programs and HMI changes
  • Machine-specific connections they need
  • A named account for each technician

Your plant team

The decisions only the plant can make.

  • Which traffic between office and plant is really needed
  • Approving each vendor session
  • How you run, ship and track lots if systems are down

Vendor remote access

Give Machine Vendors Access Without Leaving the Door Open

Machine builders and integrators often keep always-on remote access to PLCs and HMIs. Controlled access adds a small step for the vendor and removes one of the most common ways into a plant.

  • Account

    Often today: Shared or default passwords

    A named account for each technician, with MFA

  • Availability

    Often today: Always on, sometimes for years

    Requested, approved and time-limited

  • Path

    Often today: Straight to PLCs and HMIs

    Through a controlled gateway

  • Record

    Often today: No record of who connected

    Every session logged

  • Control

    Often today: Hard to find, harder to switch off

    Controls you can see and switch off

The same rules apply to your own remote workers and engineers. With monitoring at the IT/OT boundary, an unexpected connection can be seen and acted on.

CONSOLE00:00:00 ET3MT

Network / Firewall rules

Rule review

Sample data

Rule review. Stale vendor rules and over-broad access found and removed (sample data).

Security baseline

A Practical Security Baseline for Manufacturers

Seven controls that match how plants actually get hit. Tick what is true for your plant today.

Nothing you tick is sent anywhere. It is a quick way to see your gaps before a call, or before the next customer questionnaire.

Manufacturing security baseline self-check

Anything left unticked is where to start. Segmentation, controlled remote access and offline backups of PLC programs and recipes usually give a smaller plant the biggest gains. We can help you close the gaps on a free scoping call.

What Is Worth It for a Smaller Plant

Not every plant needs a dedicated OT security platform on day one. Decide based on downtime cost.

Start here

Single site, 50 to 200 staff

  • Segmentation between office and plant
  • Controlled remote access
  • Offline backups of PLC programs and recipes
  • Monitoring of the office network, where most attacks start

Relatively cheap, and they reduce the chance that an office phishing email becomes a plant shutdown.

Add later

Specialized OT monitoring

Worth the cost as you:

  • Add sites
  • Connect more equipment to the network
  • Take on customers who require it

A simple test: if an hour of lost production costs more than a year of monitoring, the decision is easy.

Regulations and requirements

Which Regulations and Requirements Apply to Manufacturers?

Manufacturing has few cybersecurity statutes in Canada. Most of the pressure comes from customers and contracts. Check the "applies if" column first.

  • Customer and OEM requirements

    Applies if

    You supply larger customers, especially in automotive, aerospace, food or pharmaceuticals.

    Security questionnaires and contract clauses. Some industries use sector frameworks, and your customer will tell you which they expect.

    vCISO
  • Controlled Goods Program

    Applies if

    You examine, possess or transfer controlled goods.

    You must register with the Controlled Goods Program and protect that information.

    Talk it through with us
  • CPCSC

    Applies if

    You supply on Canadian defence contracts.

    The Canadian Program for Cyber Security Certification. According to Public Services and Procurement Canada, Level 1 became available on April 1, 2026 and is being required in select National Defence contracts beginning in summer 2026.

    Defence suppliers
  • ISA/IEC 62443

    Applies if

    You run industrial automation and control systems.

    The widely used reference for securing them. Not a legal requirement in Canada, but customers and insurers recognize it.

    Network security
  • Privacy law

    Applies if

    You hold employee or customer personal information.

    PIPEDA, Alberta PIPA, BC PIPA or Quebec Law 25, depending on where you operate.

    Privacy compliance

General information, not legal advice.

FAQ

Cybersecurity for Manufacturing: Common Questions

Can ransomware really stop a production line if the plant is not connected to the internet?

Often, yes. Most plants are more connected than people think: the ERP sends work orders to the floor, engineers copy files to HMIs, and vendors connect remotely. Even when OT is untouched, many manufacturers stop production because they cannot schedule, ship or invoice. Segmenting networks and planning manual workarounds limits both kinds of impact.

How should we handle remote access for machine vendors?

Replace always-on connections with access that is requested, approved and time-limited. Each vendor technician should have a named account with MFA, and sessions should be logged. Route access through a controlled gateway rather than directly to PLCs or HMIs. It adds a small step for the vendor and removes one of the most common ways into a plant.

Do we need a separate security tool for our OT network?

Not always at first. Many small plants get most of the benefit from segmentation, controlled remote access, backups of PLC programs and monitoring at the boundary between IT and OT. Dedicated OT monitoring tools make sense as the plant grows or when customers require it. We help you decide based on your actual risk and budget.

Our biggest customer sent us a security questionnaire. What now?

Answer it honestly. Overstating controls creates contractual risk if something goes wrong. Use the questionnaire as a gap list: the items you cannot answer yes to are usually the ones worth fixing first. A vCISO can help you respond, prioritize fixes and build a short security summary you can reuse for future customers.

Get started

See Where Your Office and Plant Are Exposed

A free scoping call with a certified specialist. Bring your plant manager or whoever deals with your machine vendors, and any customer questionnaire you are working on. Pricing is quote only, in CAD, after the call.

  1. 1Free scoping callWe walk through how the office connects to the plant, which vendors connect remotely and what your customers are asking for.
  2. 2OnboardingOffice endpoints, the IT/OT boundary and remote access brought under protection. Most clients are onboarded in 1 to 2 weeks.
  3. 3ProtectedAnalysts on watch 24/7/365. Critical alerts are triaged and response begins within 15 minutes.

Every Cyberphore employee holds industry certifications

  • CISSP
  • CISM
  • GIAC GCIH
  • GIAC GCIA
  • Microsoft SC-200
  • CrowdStrike
  • Palo Alto Networks
  • Fortinet NSE
Systems encrypted or lines stopped? Call 24/7: +1 236 665 1165. Incident response retainer clients get remote engagement within 1 hour.

Talk to a Specialist About Your Plant

Free, 30 minutes, no obligation.

Book free assessment